Program My Keypad for My Wayne Dalton Garage Door
Wayne Dalton has been manufacturing residential garage doors and garage door openers for nearly 60 years. Wayne Dalton also offers electronic wireless keyless entry keypads that are compatible with many of their more recent garage door opener system models. When mounted just outside of your garage, a Wayne Dalton electronic keypad allows you to open or close the door by entering a user-selected, four-digit personal identification number. Programming a personal identification number for your Wayne Dalton keypad is so simple that it can be done in a snap.
Instructions
1. Press the Program button on the power head unit of the Wayne Dalton garage door opener; the LED indicator on the unit will illuminate.
2. Push the On/Off/Reset button on the electronic keypad. The light on the keypad will illuminate to indicate that it is ready to accept new programming.
3. Use the number buttons on the electronic keypad to enter a four-digit personal identification number of your choice.
4. Press and hold the 0 button until the garage door moves, indicating that the keypad programming process is complete.
Tips Warnings
Wayne Dalton recommends that you program the electronic keypad before mounting it outside of your garage.
Avoid allowing more than 30 seconds to elapse between completing each step or the keypad will automatically exit the programming mode.
Related Posts:
Change The Code On A Wayne Dalton Keypad
You operate Wayne Dalton garage door openers from a control panel installed inside your garage, a remote control or a keypad installed on the outside of the garage. The keypad operates the door wh...
Program An Old Genie Garage Door Opener
Older model Genie garage door openers use dip switches rather than a smart to program the opener and remote controls. Unlike their Intellicode system, which you can program with a press of a butto...
Wayne Dalton Quantum 3212 Instructions
The Wayne Dalton Quantum 3212 uses three buttons to transmit and control the Wayne Dalton garage door openers. This unit is programmable and is compatible with most of the Wayne Dalton doors and o...
Program A Remote For A Genie 1/2 Hp Garage Door Opener
The Genie 1/2 HP garage door opener is a heavy duty opener. When replacing the remote controls, the new remotes require programming. Programming the remote for a Genie 1/2 HP garage door opener is...
Program A Linear Garage Door Opener
Linear garage door openers can be programmed to open and close with the use of a keypad located outside the garage or a remote control. When using the keypad, the user enters a programmed code to...
