The Nikon N55 is 35mm, film-based camera.
Released in 2002, the Nikon N55 is film-based, single-lens reflex camera that has auto-focus capabilities. While the camera is no longer in production, Nikon will fix the camera's auto-focusing system at no charge. In 2005, Nikon discovered there was a production flaw in some N55 models that prevents the camera from focusing properly. If your N55 model experiences these problems, you can contact Nikon directly for instructions on send the camera in for repair, or visit you local authorized Nikon retailer who will also help you. Troubleshooting the N55 is a fairly easy process.
Instructions
1. Inspect the most recent pictures you have taken with your camera. If you suspect your camera is not functioning properly, examining your recent pictures can provide a starting point.
2. Remove the lens from the camera by pressing the lens release button located on the front of the camera. Rotate the lens until it releases from the camera.
3. Hold the lens up to a light source and look for dust or debris that may be on the outside of the front and rear glass elements. Look inside the lens for other dirt or dust that may be inside.
4. Check the auto-focus switches on both the camera and on the lens. Some Nikon lenses have an auto focus switch on the lens. This needs to be in the "AF" position. Longer telephoto lenses also have a focus range switch. Depending on the lens, they will give you a choice of a full focus range or a limited range. The concept is that by selecting the limited range, the lens focuses faster. If the lens is in this position, and you took a picture where the subject is closer to the camera than the minimum focusing distance, the lens will not focus on the subject and he will appear out of focus.
5. Check the exposure compensation button. This is a small button located by the shutter release identified with a "+\-" symbol on it. This allows the photographer to dial in a specific amount of exposure compensation, either over expose or under expose, for every picture. It is used in tricky light conditions or when the photographer wants to achieve a certain exposure. If the camera has this adjustment in use, your pictures will appear under- or over-exposed. Press the button and turn the dial on the back of the camera until it reads "0" in the LCD (Liquid Crystal Display) located on the top-right of the camera.
Tags: button located, exposure compensation, focus range, from camera, limited range
