Friday, October 8, 2010

Change The Battery Of A Verizon Razr Cell Phone

Even though they're rechargeable, cell phone batteries eventually wear out. If your Verizon Razr cell phone loses its power after just a few hours, it may be time to replace your battery. Anyone can do this--just take your time and follow the steps below.


Instructions


1. Turn off phone. Close flip. Turn phone over so its back is facing you.


2. Remove the back cover. Grasp the cover by placing your finger in the notch at the center of the top. Pull the cover off by pulling the top edge toward you.


3. Remove the battery. Place your fingernail in the notch at the center of the top of the battery. Pull the top of the battery toward you. It should pop right out.


4. Insert new battery. Install new battery so the gold connectors on the battery match up with the gold connectors on the phone. Insert the bottom of the battery first, then snap the top into the phone.


5. Replace back cover. Insert the small notch on the lower end of the cover into the center of the curved edge of the opening. Snap the top of the cover in place. Ensure that the cover is securely installed by placing a finger on either side of the bottom edge and pressing down.


6. Turn on phone.







Tags: Turn phone, back cover, cell phone, gold connectors, notch center, Verizon Razr