Wednesday, November 25, 2009

Change The Ink In A Kodak Photo Dock

The Kodak Photo Dock lets you print digital pictures directly from your EasyShare camera.


The Kodak Photo Dock is a stand-alone photo printer for Kodak EasyShare cameras. The color printer works with or without a computer and also prints black and white photographs. The printer uses a single ribbon cartridge available at drug, retail, retail superstores and other outlets. The Kodak Photo Dock's ink cartridge also comes with a pack of photo paper. Once the cartridge is empty, it is not possible to re-ink a Kodak Photo Dock ink cartridge---you must install a new cartridge order to use the printer again.


Instructions


1. Unplug your Kodak Photo Dock's power cord. Pull the black tab on the right side of the printer down to open the ink cartridge door.


2. Push up on the green cartridge release tab in the upper center of the ink cartridge to release the old cartridge. Pull the old ink cartridge carefully from the Photo Dock.


3. Rotate the new ink cartridge's ribbon wheel on the side of the cartridge clockwise with your finger to remove any slack in the film. Do not rotate the wheel too much---this will damage the cartridge.


4. Insert the new ink cartridge into the Photo Dock with ribbon film facing down until you hear the cartridge click in place. The ink cartridge will only go in one way.


Do not touch the ribbon with your fingers. Handle the cartridge by its edges.


5. Close the ink cartridge door and plug in your Kodak Photo Dock's power cord.







Tags: Photo Dock, Kodak Photo, Kodak Photo Dock, your Kodak Photo, cartridge door