Suction cups are a convenient way of mounting a GPS unit to your car's windshield. They are easy to see, and you can move the GPS back and forth between vehicles. They are held in place using a vacuum seal between the face of the suction cup and the surface of the glass. If you don't mount the suction cup securely, your GPS may fall off the windshield when you least expect it.
Instructions
1. Assemble the suction cup mount according to the manufacturer's instructions.
2. Determine the location on the windshield where you want to mount the suction cup. Choose a location where the screen is easily viewable but not obstructive, and you can reach the controls without stretching.
3. Wipe the inside of the windshield with a microfiber cloth to remove any dust or debris.
4. Clean the area with an alcohol wipe to remove any film left on the surface of the glass.
5. Remove the film covering the suction cup. If you are remounting the suction cup from another vehicle, clean the surface of the cup with an alcohol wipe.
6. Wet your finger with water and rub it around the edge of the suction cup. You want the edge wet to enhance the seal. Skip this step if the suction cup already has an adhesive applied.
7. Press the suction cup to the surface of the windshield and engage the locking mechanism. Most suction cup mounts have a lever that pulls up on the center of the cup.
8. Wipe away any excess moisture using the microfiber cloth.
Tags: alcohol wipe, microfiber cloth, mount suction, suction surface, surface glass, with alcohol
