Throat microphones differ from conventional microphones in that they attach directly to the throat and take audio input from the larynx. This input design allows for a clear and unadulterated vocal signal that is unaffected by exterior noises. Throat mics are common with military pilots and nightclub DJs who need to communicate in extremely noisy environments.
Instructions
1. Fit the throat microphone around your neck so it is securely fastened in place. The transponders (mic pickups) should rest comfortably on your throat. There are often two transponders, both of which should be making solid contact with the throat.
2. Fasten the throat strap at the back of your neck so it anchors the unit and keeps it in place.
3. Fit the ear piece into the desired listening ear. If there are two ear pieces, then place both of them in your ears.
4. Plug the mic output cable into the transmitting or receiving device. If the throat mic is wireless and transmits over radio waves (like a two-way radio), then the mic cable will attach to the transmission box that comes with the throat mic. If the mic will be connected to a receiving device like a cell phone or computer, plug the mic cable into the device's audio input port.
5. Press and hold down the push-to-talk (PTT) button each time you wish to communicate on the throat mic. Release the button when you've finished communication and are ready to listen.
6. Tune the receiving device (if the mic is wireless) to the broadcasting frequency. This frequency is different for all mics and can be found on the front of the throat mic's box or in the manual.
7. Test the mic several times before putting into full operation by asking someone to listen on the other end of the radio (wireless) or by recording some audio (computer). If the sound is unclear or choppy, readjust the sensors around the throat until the audio quality improves.
Tags: receiving device, audio input, cable into, with throat, your neck
