Trail Scout Pro includes the ability to record audio.
The Bushnell Trail Scout Pro is a state of the art trail camera. Attached to a tree and left unattended, the Trail Scout uses motion sensors to turn on and record anything moving in its field of view. Features include a moon phase stamp, game call technology, infrared sensors and night vision. Set up your Trail Scout with an easy-to-use toggle switch system that allows you to input the date, time, year and other useful information. Though several versions of the Trial Scout Pro exist, all with different features, the general procedure for resetting any Trail Scout Pro is the same.
Instructions
1. Open the front cover by turning the center knob 90 degrees until horizontal. Toggle all switches to the center position. Remove the batteries. Leave the batteries out for one minute. Replace the batteries.
2. Move the first switch up to the "On" position. Bushnell should show for two seconds on the LED display. Move the switch to the center (Setup) position.
3. When the LED shows "Set Date," then press "Enter." Use the "Up" and "Down" buttons to enter the correct date in the month/day/year format. Press "Enter" after entering each section until finished.
4. Press "Down" until the LED shows "Set Time," then press "Enter." Use the "Up" and "Down" buttons to set the hour and minute. Press "Enter" after entering each section until finished.
5. Press "Down" until the LED shows "My Name," then press "Enter." Use the "Up" and "Down" buttons to select the characters to create a name for the device. Press "Enter" after entering each character until finished.
6. Press "Down" until the LED shows "Password Set," then press "Enter." The LED will show "Password Yes." Press "Enter" to set a password or press the "Up" button, then press "Enter," and now password will be set.
If setting a password, use the "Up" and "Down" buttons to set a four-digit password. Press "Enter" after entering each section until finished.
7. Press "Down" until the LED shows "Set Day Time," then press "Enter." Use the "Up" and "Down" buttons to set the hour for sunrise and the hour for sunset using a 24-hour clock (1pm = 13). Press "Enter" after entering each section until finished.
8. Use the other toggle switches to set the operating modes. When finished with setup, move the first toggle switch to the "On" position. Close the front cover and secure by turning the knob 90 degrees until vertical.
Tags: then press, then press Enter, Trail Scout, after entering, after entering each
