The Flip Mino is a pocket-sized digital video camcorder that can be connected directly to your computer. Because it is so small, there is always the risk of losing the device. You can prevent loss by attaching a wrist strap to the unit. By attaching this strap to the camera and your wrist, you will ensure that you won't lose the unit.
Instructions
1. Remove the included wrist strap from its packaging and locate the two holes on the bottom-left corner of the unit.
2. Unscrew the looped end of the wrist strap and slide the tip of the end of the loop into one of the holes.
3. Gently press the strap into the hole until the tip of the loop comes out of the end of the other hole.
4. Pull the loop as far out of the second hole as it will go. Open up the loop with your fingers and place it over the metal connector end of the strap.
5. Pull the metal connector end of the strap through the loop until the loop tightens around the metal connector.
6. Screw the metal connector back into the remaining part of the strap.
Tags: metal connector, connector strap, Flip Mino, metal connector strap, until loop
