Replacing the memory card in your computer yourself saves you money.
The memory in your computer is one of the components that dictates what your computer can handle and how it operates. If the memory card fails, your computer will be unable to operate and you will need to replace that memory card or buy a new computer. Replacing the memory card is the cheaper option, especially if you are able to install it yourself. You can install your own memory card in just a few steps.
Instructions
1. Turn off and unplug the computer. You do not want any power to be coming into your computer to eliminate the risk of shock and burning out components. Place the computer on a hard, flat surface. Avoid working on carpet.
2. Remove the cover from your computer tower. Use a screwdriver to remove any screws and pull the cover off to reveal the components inside the computer.
3. Discharge any static before touching the inside of the computer. Wear an anti-static wristband grounded to your computer or touch a metal part of the casing.
4. Use compressed air to clear out the inside of the computer. Over time, dust collects inside a computer. Dust inside can affect the computer's performance and it is a good idea to clean it out periodically. Since your computer is already open, it is a good time to do it.
5. Find the memory card slots. These slots are generally found near the wires that enter the motherboard.
6. Remove the old memory card. Grasp the card and gently pull outward to remove. You may need to wiggle it a little to loosen it enough to remove.
7. Install the new memory card. In most computers, push the new memory card gently into place until it snaps. For some computers, place the card in at a 45-degree angle and then press down to snap it into place.
8. Replace the computer cover. Plug the computer back in and start it up. Enter the BIOS screen on start-up. A message during booting will instruct you reach the BIOS screen.
9. Reset BIOS to accept the new memory card. Read the instructions on the screen. Press either DEL or F1 as specified in the instructions. This will automatically read the new memory. Check that the amount of memory listed on the screen matches the card you installed. If it is correct, click save and exit. The computer will then reboot and restart normally, ready to operate with the new memory.
Tags: memory card, your computer, inside computer, BIOS screen, card gently, computer will
