Panasonic IC recorders are battery powered hand held digital recorders. The recorders are easy to use and will work without fail under most conditions. There are times, however, when your Panasonic IC recorder may not function properly. Many problems are common and can be fixed by troubleshooting the recorder.
Recorder Does Not Work
You may find that your Panasonic IC recorder does not work from time to time. When this occurs, check that the batteries are in the device and the battery cover is closed and secure. If the cover is not secure the batteries may dislodge from the unit.
Next, check the "HOLD" switch on the right side of the device. If the switch is pushed up, the device is locked to prevent accidental operation. To use the recorder again, press the "HOLD" switch down.
No Sound from the Speaker
Sound files are played back on a Panasonic IC recorder through the built in speaker. If you attempt to playback a file but no sound comes out of the speaker, check if headphones are connected to the device. When headphones are connected to the recorder, no sound will play through the speaker. Turn up the volume if the headphones are not connected. The volume dial is located on the top of the device and should be turned to the right to raise the volume.
No or Low Sound in the Headphones
If there is no sound in the headphones when you are playing back a file or if the sound is low or muffled, make sure the headphones are fully inserted into the device. Unplug the headphones and clean off the plug and the insert port if the sound is still muffled. Dirt and grime can have an adverse affect on the sound quality in your headphones if present on the headphone jack or plug.
Fast or Slow Playback Speed
You may find that the playback speed of your recorded files is faster or slower than normal. In most cases this is occurs because the playback speed of the recorder has been adjusted. To change the playback speed, press the "Mode" button until the playback speed display is on the LCD. Use the "Play/Stop/Sel" dial on the top corner of the device to adjust the playback speed. Press the dial to set the playback speed. To return the playback speed to "NORMAL," press and hold the "Stop" button.
Tags: playback speed, headphones connected, file sound, find that, HOLD switch, Panasonic recorder
