The Kodak EASYSHARE M1093 IS Digital Camera, also known simply as the Kodak M1093, is charged directly via a Kodak 5V AC Adapter, which is packaged with the camera or sold separately. The adapter connects the KLIC-7004 removable battery located inside the camera to an electrical source through a socket. Once you connect your camera to the adapter and source of electricity, your Kodak M1093 monitors the progress of the charging and alerts you with a "Battery Charging" light when the charge is complete.
Instructions
1. Turn off your Kodak M1093 digital camera. Position the camera with the back facing you.
2. Push the plug on the Kodak 5V AC Adaptor into the "DC-In (5V)" port located on the top right side of the camera.
3. Plug the two-prong opposite plug into an electrical socket. If the camera is working without malfunction, the "Battery Charging" light on the top of the camera should flash while the battery charges.
4. Unplug the AC adaptor after the "Battery Charging" light remains on, but stops blinking. Unplug the adaptor from your camera and begin using your camera again.
Tags: Kodak M1093, Battery Charging, Battery Charging light, Charging light, your camera, your Kodak M1093
