A filmstrip projector can be used in any room no matter how much light is in the room. Simply move the projector closer to the screen you are viewing the filmstrip on until the picture is bright enough. Moving the projector closer to the screen will also make the picture smaller, moving it further away will make the picture larger. Read on to learn more.
Instructions
1. Clean the lens and the glass plates that the filmstrip passes through before each use. Use a soft cloth and a solution of 50 percent water and 50 percent alcohol.
2. Feed the filmstrip upside down between the glass plates. If you look at the filmstrip while you are feeding it through, the writing should appear backwards.
3. Move the framing handle up or down to frame the image on the screen.
4. Turn the lens to focus the picture.
5. Advance the filmstrip one frame at a time by turning the film advance knob.
6. Rewind the filmstrip when you are done so the beginning of the film is on the outside of the roll.
7. Place the filmstrip back into the protective case for storage.
Tags: closer screen, glass plates, make picture, projector closer, projector closer screen
