Sony Xplod systems commonly hook up the same way. Sony Xplod speakers are wired to the Sony Xplod amp by their corresponding labeled connections for the positive and negative inputs. The Sony Xplod amp must be grounded to the metal frame of the automobile. The connection on the Sony Xplod amp that is labeled "Remote" or "Remote Lead" is the wire connection that turns the Sony Xplod amp on and off when the engine is started. The connection that is labeled "Power" is the connection for the power cord. The white, red and yellow inputs on the Sony Xplod amp are for the RCA cables.
Instructions
1. Connect the 10-gauge wire to the connection on the Sony Xplod amp labeled "Ground." Connect the other end of that wire to the metal frame.
2. Connect the speaker wire to the Sony Xplod speaker in the corresponding inputs on the rear of the Sony Xplod speaker. Connect the speaker wire to the corresponding connections on the Sony Xplod amp.
3. Connect the speaker wire to the connection on the Sony Xplod amp labeled "Remote." Plug the RCA cables into the Sony Xplod amp in their corresponding inputs.
4. Lead the remote, power and RCA cable/wires to the stereo receiver. Plug the RCA cables into the stereo receiver in their corresponding inputs. Connect the remote wire into the remote connection on the stereo receiver.
5. Lead the power wire to the power source and connect the power wire to the positive output on the power source.
Tags: Sony Xplod, Connect speaker, Connect speaker wire, connection Sony, connection Sony Xplod, corresponding inputs
