An Infra Red (IR) Illuminator is used in night vision equipment where there is insufficient light to see an object. The Infra Red light significantly improves the visibility, which is often compromised at night. Objects that are hardly visible to the naked eye can be detected through an Infra Red illuminator. You can also use the 450 mW IR Illuminator with the ATN Night Spirit Night Vision Monocular to enhance visibility. Here's how you can use the Infra Red Illuminator with the ATN Night Spirit Night Vision Monocular.
Instructions
Using the Infra Red Illuminator
1. Pull out the operation knob and twist it to the "IR" position
2. Begin using the Infra Red Illuminator.
Using the 450 mW IR Illuminator
3. Use the 450 mW IR Illuminator with the help of a separate battery, not the battery supplied with the main unit.
4. Install the battery by unscrewing the cap and inserting the battery in the direction depicted by the diagram on the IR.
5. Screw the adapter into the thread on the scope.
6. Install IR to the rail of adapter and screw in the fixator.
7. Turn on the digital IR illuminator by pressing the "+" button and turn it off by pressing the "-" button. The green LED light will be lit when the IR illuminator is turned on.
8. Adjust the IR brightness by pushing "+" and "-" buttons.
9. Change the IR beam width to adjust the field coverage and to bring it into focus. To do this, simply turn the IR lens.
10. Use the screw tool provided with your set to open the IR control panel and change the position of the IR.
Tags: Infra Illuminator, Illuminator with, Night Spirit, Night Spirit Night, Night Vision, Spirit Night
