Share Photos Using Kodak Easyshare

Have you purchased a camera that includes the Kodak EasyShare software, but you're not sure share your photos with family and friends? These easy steps will have you emailing and sharing those precious memories in no time!

Instructions

1. Double click the Kodak EasyShare icon on your desktop if you've installed the software. If not, simply insert the provided installation disk and follow the installation instructions.

2. Click "email" from the tabs on the left side. Your email address appears in the "from" line.

3. Type the email addresses of the people with whom you'd like to share these photos. Separate multiple addresses with a comma. You may also use the Address Book to select email recipients if you have saved email addresses there.

4. Decide if you want a copy of the email along with the attached photos sent to your email address as well. Check or uncheck the box that says "Send a copy of this message to me."

5. Choose a subject line for your recipients to read before they open the email. You can leave the subject line blank if you want, but some people appreciate knowing the subject of an email before they open it.

6. Include an explanation in the "Message" section if you want, or leave it blank if the pictures are self explanatory.

7. Click the round blue icon with the square and a plus sign from the menu on the right side.

8. Click the folder where your chosen photos are stored from the menu on the left side.

9. Click on the photo you want to attach to the email and share with friends and family. If you want to share more than one photo, click the "Hold Selected Pictures" icon (the folder with the check inside it) every time you select a new photo to ensure that they all get attached to your email message.

10. Click the "email" tab again from the left side.

11. Choose whether you would like your photos optimized to use less memory when emailed, or if you want the photos sent in their original format no matter how long the download time will be for the recipient. Select your choice to the left side of the email body.

12. Click the yellow "Send" button to complete the process.

Tags: left side, before they, before they open, Click email, email address, email addresses

Mount A Camera

Macro Photography

Mounting a digital camera on a tripod allows the photographer to make use of some of the most important capabilities of a camera. Tripods are used to take self-timed pictures and to allow the photographer to take steadier shots. Knowing mount a camera on a tripod is important because it will allow you to take pictures that are less blurry and more level.

Instructions

1. Take off the mount at the head of the tripod. This will allow you to connect the camera onto the mount much more effectively than if you were to mount the camera on the tripod itself. To do this, pull the release at the head of the tripod, freeing the mount. You can then attach the camera to the detached mount.

2. Fit the mounting socket, found at the center of the mount, into the hole at the base of your camera. Secure the camera in place either by turning it clockwise to lock it on the mounting socket or by tightening the wheel on the mounting socket, depending on your tripod mount capabilities.

3. Extend the feet of the tripod to allow it to stand on the floor. It is easier to extend the feet before you place the mount on the tripod. Release the locks on the feet and pull the feet. Lock the joints.

4. Pull the release and allow the mount to sit on top of the tripod, then let go of the release to lock the mount securely on the tripod. You may want to give the camera a little shake or use the bar to move the camera in different directions.

5. Turn on the camera and do a test shot. View the resulting picture and check that the frame is straight. Make sure the tripod is level to get a straight picture. Check that the feet are firmly planted to avoid damaging your camera.

Tags: camera tripod, mounting socket, head tripod, mount camera, mount camera tripod, mount tripod

Does A Blackberry Curve Run Faster With A Bigger Sd Card

If your BlackBerry Curve starts to take a long time to even open up the simplest application, you may be considering purchasing a larger SD card to help the device's performance. While a larger SD card will not directly make your BlackBerry faster, it can still be part of a solution that results in increasing your Curve's performance.

BlackBerry System Memory

Your BlackBerry Curve comes with a set amount of flash memory installed with the device. Whenever you turn your Curve on, the device uses this memory to load the operating system and the Java application modules. This means that every application you have loaded on your device will take up a part of this memory. Additionally, this memory will store any media or files that you have placed on the device, as opposed to on a memory card. The remaining memory is used for system process, and the more memory that is available, the faster the system will run.

BlackBerry SD Cards

The BlackBerry Curve uses the SD card that you install in the device as alternative storage. On top of storing regular files and music files, the SD card will also store images and video, both those taken from the device's camera and those from outside sources. The nature of these files allows the BlackBerry operating system to use them despite the fact that they are not installed in the device memory, something it can't do with application files. The SD card can also store archived versions of any application you have download from the App World.

SD Cards Effect on Device Memory

Since the SD card is used only for storage and not for system process, changing from a small card to a large one will have no effect on the Curve's overall system speed. However, if you use that extra space to move additional files from the system memory to the media card, it will result in an increase in performance. You can also choose the "Archive" option listed under any app in the BlackBerry App World application. This will delete the app from your system and free up some memory, but will then store an archived copy of the app on the memory card so you can reinstall it within seconds should you ever need the app again.

Make Your Curve Run Faster

Optimizing your BlackBerry Curve's processing speed is all about removing things from the device's memory. You should use your SD card to store all your media files, and you should always archive or delete applications that you no longer use. You can go into the "Applications" menu under the Advanced Options heading to get a list of everything that is installed on your device. Delete anything that you never use, especially memory hogging alternative language files or foreign character files. Also, be sure to reset your BlackBerry Curve once a day, so that your system consistently dumps unneeded temporary files from memory.

Tags: BlackBerry Curve, card will, this memory, also store, application have, BlackBerry Curve, Curve Faster

Motorola Flip Phone Instructions

Motorola introduced the United States to the ultra slim flip phone via the RAZR, and since then the company has continued to produce some of the most popular flip phones in the country. Like standard non-flip phones, the devices can make and receive calls, as well as other features.

Answer and Make Calls

There are two different ways to answer calls with Motorola flip phones. The first is when the phone has already been opened. Just like a non-flip phone, you will press the green button (on the left side of the keypad). You can also answer calls when the phone is closed by simply flipping the phone open. Likewise, you can end calls by simply shutting the device.

Placing calls can be done by either typing in the number of the contact or selecting the number from the saved contacts list. Press the green button to send the call.

Adding Contacts

Press the "Menu" button (the top left button of the phone). This will bring up several options. Use the directional arrow buttons to navigate to "Contacts." Press either "OK" (in the middle of the directional arrows) or the green button.

When the contacts list comes up, press the arrows up until you find "New Contacts." Type in the name of the contact, as well as the number. Press "OK" and the contact will be saved.

Other Options

There are other options available with Motorola flip phones. You can take pictures by pressing the "Menu" button, then selecting "Camera." The screen will turn into the view finder and you can take a picture by pressing "OK." To view the picture, go back to "Menu" and select "Pictures."

Almost anything you need to find or do can be done through the "Menu" button.

Tags: flip phones, green button, Menu button, with Motorola flip, answer calls, button left, contacts list

Transfer Video From My Jvc Camcorder To My Computer

Often the DV cable is sold separately from the camcorder.

After recording some timeless footage on your JVC camcorder, you may be inclined to rush home to transfer your shots to your computer. From there, you can either store your videos on the computer's hard drive or burn them onto a DVD. First, however, you may have to consult your camcorder's instruction manual for transfer videos. You will need a DV cable to transfer your videos as opposed to a USB cable, which can only transfer still images.

Instructions

1. Install the JVC software (like the Everio MediaBrowser) that comes with your camcorder onto your computer. There are some system requirements for installation. Check to see that your computer has a DV connector port, depending on your camcorder model.

2. Switch to the use of AC Adapter during the transfer, as opposed to your battery pack. Connect the DV cable to your computer before attaching it to your camcorder. You should end up using the JVC VC-VDV206U or VC-VDV204U, depending on whether your computer DV port has four or six pins.

3. Instruct your camcorder to play back on the computer and await the transfer of the video files. Do not disconnect the DV cable until notified of a successful transfer. You may want to back up your files on your computer. Afterward, create a new folder to store all of your video files.

4. Restart your computer to troubleshoot any problems you may encounter during the transfer. You may also refer to the corresponding instruction manuals (i.e. software, computer, camcorder).

Tags: your computer, your camcorder, during transfer, store your, transfer your

Camera Flashes

About Camera Flashes

Anyone who has ever used a camera knows that the majority of cameras come equipped with a flash device of some sort. Flashes are essential in taking photos indoors or in areas where lighting is poor. The function of a camera flash is rather simple and there are various types of flashes, ranging from those that are built into the camera, to those that attach to the camera separately. Either way, camera flashes have come a long way, since they were first invented.

History

The flash bulbs of today descended from flashes that were made up primarily of magnesium flash powder. Back in those days, the powder had to be ignited by hand, which caused a flash, right as the photo was being taken. As time progressed, flash bulbs were developed. These bulbs contained filaments made up of magnesium. The magnesium was ignited much like the flashes of yesteryear, when a contact in the camera shutter touched the filament. These bulbs were single-use, and became extremely hot once the magnesium was ignited. The fact that the magnesium was contained in a bulb, turned out to be a great advance in the history of the flash.

Milestones

Kodak took great strides in the 1960s, when the improved the technology of their Instamatic camera's flashbulb. They invented what is known as the flashcube. This cube was made up of four flashbulbs that were electrically fired. They also had a reflector that was integral in the cube-shaped bulb, that allowed the photographer to take four consecutive photos. A fresh bulb would be ready to go when the cube rotated after a photo was taken.

Later on, the Flipflash hit the market. This bar-type flash came equipped with 10 bulbs in one unit. This made taking instant photos much easier, as the photographer could take 10 pictures before he had to replace the bulb unit.

The flash units of today are usually the electronic xenon flash variety. With this type of flash, xenon gas is contained in a tube. When the high voltage of electricity meets the gas, a flash of light is emitted during what is known as an electrical arc. This process produces the modern flash.

Function

If there is not enough ambient light in a room, the use of a flash is typically necessary. An object can be illuminated when a fill flash, or a flash that is low powered, is added to the room's or area's ambient light. If the photographer is in a room that has a white ceiling or wall, he might want to point the flash upward or sideways. By doing this, the wall or ceiling acts as an umbrella for the flash, and will reflect light on to whatever he is photographing.

Warning

Though very convenient, built-in flash systems can sometimes has a low flash intensity. This means that the flash cannot provide enough light to take a good photo at distances of over 10 feet. When this happens, grainy photos will result. Most manufacturers will include a recommended distance at which to take photos. It's important to heed these recommendations to produce quality photos.

Benefits

Having a built-in flash can make life much easier when taking photos. However, the flashes that attach to the top of a camera function in much the same way as the built-in flashes, so those types are also beneficial to use. Either way, long gone are the days of having to change out flash cubes or flash bars once they ran out. Not having to change them also reduces expenses because you do not constantly have to buy new flash bulbs for your camera.

Tags: flash bulbs, ambient light, attach camera, built-in flash, bulbs were, Camera Flashes

Sunpak 544 Flash Specifications

The Sunpak 544 is an older, mounted-style flash unit. Taking photos with it can dramatically improve your images by adding dynamic light and making your subject "pop" from the background. While this model will still be effective, only use a flash unit if it is compatible with your camera. Incompatible voltages can render the camera and flash useless. Check with your camera manufacturer if the Sunpak 544 is compatible.

Core Features

This flash is capable of lighting up to 140 feet with ISO 100 film and 100 feet with ISO 50 film. With 6 AA-sized batteries, it can produce 800 flashes with a .3 second recharge time on the minimum setting and 100 flashes with a 9 second reload time on the maximum setting. The color temperature of the light is 5500 Kelvin.

Additional Features

The flash head is capable of rotating 60 degrees horizontally and 45 degrees vertically. The automatic distance range is 1.6 feet to 50 feet with the maximum aperture and 1.6 feet to 18 feet with the minimum aperture. The acceptable sensor angle is 15 degrees and the duration of the flash is between 1/450 and 1/25000 of a second.

Pricing and Availability

As of 2010, this flash unit can be purchased for $180 used. Due to its age, you will need to find a specialty photo store or an individual seller to purchase it. Most large electronics retailers don't carry it anymore.

Tags: feet with, flash unit, feet feet, feet feet with, feet with film

Use A Terk Tower Antenna

The Terk tower antenna is a powered antenna intended to improve AM/FM reception. The practical range will depend on factors specific to your location, like topography, interference from buildings, and atmospheric issues.

Instructions

1. Determine the type of connection your FM radio uses. Take a look at the back of the radio. If it has a coaxial terminal--that's a jack which looks like the antenna input on your television--it's called a 75 Ohm Coaxial connection. If it has a place to connect 2 wires, then it's called a 75 Ohm Push Button Connection.

2. Make the FM connection. In the case of the coaxial connection, simply slip the antenna's connector over the jack. In the case of the push-button connection you will need to use the supplied transformer. Slide the red transformer onto the antenna's FM connector. Then slide the red wire from the transformer into the slot marked "FM 75 Ohm" and the black wire into the terminal marked "FM Ground" on the antenna.

3. Make the AM connection. Slip the antenna's bare AM wires into the slots on your radio marked "AM Antenna" If your radio has screw terminals, just wrap the bare wires under the screws and tighten them.

4. Plug the small end of the power supply into the jack at the end of the FM lead. Plug the antenna's power supply into a wall socket.

5. Locate the antenna away from direct contact with stereo equipment and close to a window.

6. Turn your radio on, tune it in, and adjust the gain control wheel on the antenna until the signal sounds undistorted. Rotate the wheel in the negative direction if you are close to the source, and in the positive direction the further away from the antenna you are. Play with it until the signal sounds right.

Tags: your radio, antenna connector, away from, bare wires, Make connection, power supply, power supply into

What Does Slr Mean When Referring To A Digital Camera

An SLR camera offers the most power and flexibility.

SLR means Single Lens Reflex. The photographer is actually looking through the lens when he composes his shot; then when he clicks the shutter, the reflex of the camera is that a mirror pops out of the way as the shutter opens, exposing the digital sensor.

The Single in Single Lens Reflex

The single in single lens reflex comes from the fact that there is a single path for the view finder and the exposure. This is different from older or more basic cameras that use a dual path for these two functions. In those cameras, the viewfinder is parallel to the lens but separate.

This has two disadvantages. First, as the angle of the shot and the distance to the subject changes, the perspective will be slightly different, so what you see may not be what you get. Second, a separate viewfinder usually can't take advantage of a zoom lens' changing magnification.

The Lens in SLR

The lens part of SLR refers to the fact that the user is actually looking through the lens as he composes the shot. This means that what you see is exactly the same thing that the digital sensor will see. The angle, perspective and zoom magnification will be the same in the viewfinder as what ends up in the image.

The Reflex in SLR

Finally, the reflex part of SLR refers to the action, or "reflex" of the camera when the photographer clicks the shutter. While looking through the viewfinder, the user is actually looking into two mirrors that reflect the view shown through the lens back through the viewfinder. When they click the shutter button, not only does the shutter open for the length of time set in the shutter-speed, but the mirror between the lens and the sensor flips up out of the way, allowing light to expose the image.

Other Advantages

The other main advantage of SLR cameras, although it isn't a part of the SLR technology is that almost all SLR cameras allow the user to change lenses. Allowing the photographer to choose between an array of magnifications, speeds, qualities, and other technical differences in modern lenses is what truly sets the SLR camera apart in terms of power and flexibility.

Disadvantages

There are two main disadvantages to the SLR digital camera. The first is initial cost. Even a basic body and one or two budget lenses will cost more than most point-and-shoot cameras.

The second is the learning curve. This applies not only to the time it takes to learn all the controls and functions of the SLR camera. A point-and-shoot camera does a lot of the processing and finishing of the image. With a digital SLR camera, this work is left up to the photographer to handle.

Tags: actually looking, looking through, through lens, actually looking through, clicks shutter

Set The Selftimer On A Canon Eos 40d

Set the Self-Timer on a Canon EOS 40D

The Canon EOS 40D digital SLR camera's self-timer feature allows you to take a picture using a 10-second or two-second timer. The 10-second timer makes it possible for you to position yourself quickly into a shot. The two-second timer makes it possible for you to remove your finger from the shutter and move away from the camera to prevent camera shake caused by touching it. No matter which timer you use, setting the self-timer feature only requires that you know which button to push to access the self-timer options. The rest simply involves focusing and taking the shot.

Instructions

1. Turn on your Canon EOS 40D digital SLR camera.

2. Press the "AF/Drive" button.

3. Look at the camera display and turn the "Quick Control" dial to the 10-second self-timer icon or the two-second self-timer icon.

4. Position your camera on its tripod to face your subject. Focus on the subject and then push the "Shutter" button down to start the self-timer.

Tags: Canon digital, Canon digital camera, digital camera, makes possible, self-timer feature

Use A Telephone

Using a telephone is something that most people take for granted and never think about. Even though it seems like a "no brainer," the tips and guidelines provided here can used in any way that is needed. Perhaps you have to teach a child to use the telephone properly, or you or a loved one has experienced a tragic event that resulted in the need to re-learn basic life skills. By reading the information presented here, you will learn properly use a telephone.

Instructions

1. Get familiar with the phone. If the phone is an old-fashioned dial phone, learn dial each number and wait for the dial to go back in place. If the phone is a push button phone (known as a "touch tone" phone), study the number placement of the buttons.

2. Know the phone number. If calling a local number, all that you will need is the correct seven-digit number that will call the desired person or place of business. If calling a long distance number in the United States, you need to dial "1," the area code, then the seven-digit number. If you are making an international phone call, you need to know the country's code (see Resources below).

3. Placing a caller on hold. If you answer the phone and the caller wishes to speak to someone in your home or place of business, never yell with the phone near you. When getting the attention of the person needed on the phone, place the caller on hold by saying "Hold, please." Either put the phone down on the table or press the "hold" or "mute" button.

4. Using call waiting. When you are talking on the phone and hear a beep, that means that you have another call coming in. To allow you to switch over to the new call while keeping the current caller on hold, simply press the switch hook (the button that hangs up the phone).

5. Use call conferencing. When you want to have a conversation with more than one person, this can be done by using call conferences (also called three-way calling). Call conferencing can be accomplished by pressing the switch hook one time for only a second or less. This will put your current caller on hold and enable you to dial the second number. When the second party answers, simply press the switch hook once again to join all three parties in conversation.

Tags: caller hold, switch hook, current caller, current caller hold, number that, number that will, phone call

The Effects Of A Wide Angle Lens

One of the best features of a single lens reflex camera is the ability to change lenses. Wide angle lenses have short focal lengths that allow for a wider viewing angle and greater depth of field. However, the lens is not without drawbacks, including distortions.

Focal Length

Wide angle lenses have focal lengths of 28 millimeters (mm) or less. A zoom lens with a minimum focal length of less than 28 mm has wide angle capabilities.

Composition

Wide angle lenses have less zooming power than standard or telephoto lenses so they capture a wider view than other lenses.

Depth of Field

Wide angle lenses have a greater depth of field than telephoto lenses. This means that more of the photo will be in focus.

Distortion

A wide angle lens makes objects that are close to the lens look bigger than they actually are and objects that are far away look smaller than they actually are.

Macro Lenses

Some wide angle lenses have macro capabilities, which means they can reproduce subjects at life-size proportions.

Tags: angle lenses, angle lenses have, lenses have, Wide angle lenses, depth field

Lighten Photo Effects

One of the great troubles of photography on a budget is exposure. Many cheaper cameras do not take decent photos in the dark, even though most of them have a flash. The photos turn out muddy and dark. However, you can salvage your photos by running them through a digital art program, such as Adobe Photoshop CS3. A few clicks of the mouse button will transform dark, nighttime photos into crisp, vivid photographs.

Instructions

1. Import your photo in Adobe Photoshop CS3 by left clicking "Open" from the File menu and selecting the file's location from the resulting pop-up window. Click on "Open." Make sure that the photo you select has a high resolution. Choose one that is at least three megapixels, though five megapixels is ideal.

2. Left click on "Image" from the menu at the top of Photoshop. Hover your mouse over "Adjustments," but do not click. Another menu appears.

3. Left click on "Levels."

4. Look at the window that pops up. The graph in it is a representation of the distribution of light and dark in your photograph. Locate the black, gray and white arrows under the graph. Adjust hues for dark, light and in-between values by sliding the arrows. Photoshop will show you how your decision affects the photo in real time. Slide the white and gray arrows to the left to lighten your photograph. Left click "OK" once you are happy with your adjustments.

5. Click on "Hue/Saturation."

6. Left-click on the arrow on the bar labeled "Saturation" and hold down the button.

7. Slide the arrow to the right. Just as with levels, Photoshop shows you how changes in saturation affects your photo in real time. Release the arrow when the saturation level reaches an optimal level. Click "Ok."

8. Select "File" from the top menu and save your image.

Tags: Left click, Adobe Photoshop, from menu, photo real, photo real time, real time

Connect A Digital Camera To A Computer For Closedcircuit Tv

Connect a Digital Camera to a Computer for Closed-Circuit TV

Digital cameras connect to other audio/video devices, such as a computer, with a USB cable for fast hookup and video downloads. Closed-circuit television on a computer involves a direct link with a video camera for setting up surveillance. The easiest way to set up closed-circuit TV on a computer is to use a Web cam and software that enables the user to monitor the area under surveillance from anywhere in the world by logging onto the Internet and streaming video from the camera to the Web.

Instructions

1. Position the camera over the desired viewing area.

2. Connect the USB cable to the USB port on the back of the camera and attach the other end to a free USB port on the computer.

3. Place the CD software in the computer's media tray, close the tray and wait for the disc to start playing automatically.

4. Install the software on the computer by clicking the on-screen prompts. Re-start the computer after installing the software.

5. Turn on the camera, which will typically have a toggle on/off switch on the back of the component.

6. Open the camera software on the computer by double-clicking the name of the program. The software automatically detects the camera, which can be configured for timer recording or live video streaming through an Internet connection.

Tags: software computer, Camera Computer, camera which, Connect Digital, Connect Digital Camera, Digital Camera

Motorola Minitor Iv Specs

Fire departments frequently use the Motorola Minitor IV.

The Motorola Minitor IV is an analog voice pager that was manufactured by the telecommunications company Motorola, Inc, which is based out of Illinois. The customizable two-tone pager is beneficial for many different uses, particularly for occupations that require emergency notifications, such as firefighting and law enforcement. The pager offers a variety of features, including expanded stored voice and programmable alerts.

Performance

The Motorola Minitor IV offers 65 decibel selectivity. The term "channel spacing" describes frequency differences of radio channels. The Motorola Minitor IV has both wide and narrow band channel spacing. The pager has UHF and low band frequency. The sensitivity range is between 3.0 and 5.5 microvolts per meter. The operating temperature for the pager ranges from -30 degrees Celsius to 50 degrees Celsius.

Battery

The Motorola Minitor IV uses a NiMH 3.6V battery. Nickel-metal hydride batteries use alloys as negative electrodes as opposed to cadmium.

Features

Some notable features that are part of the Motorola Minitor IV include a synthesized receiver, earphone and speaker jacks, two group and four individual codes for every channel, codes and frequencies that are field-programmable, manual reset, dynamic voice storage (for up to two minutes), vibrate or tone alert and dual-channel priority scan.

Compatibility

The Motorola Minitor IV is entirely compatible with all accessories and phone chargers for another pager model by Motorola, which is known as the Minitor III.

Tags: Motorola Minitor, channel spacing, degrees Celsius, Minitor Motorola, Minitor Motorola Minitor

Connect A Data Collector To A Leica Instrument

Leica Geosystems makes instruments that read, store and show information for your personal mapping needs. The company is based in Heerbrugg, Switzerland, and has grown its customer base to tens of thousands over the course of its almost 200 years in existence, thanks in part to its growth to 28 countries around the world. Connecting a data collector to your Leica Global Positioning System (GPS) helps greatly with the information-gathering process.

Instructions

1. Press the "On/Off" key on the the Leica GPS instrument to turn it off; remove the controller, such as a Leica TR500, from the instrument.

2. Connect the data collector, such as a WinCE, to the Internet.

3. Plug the cable end of the Leica 560254 cable into the "Terminal" port of the Leica GPS, and plug the Lemo connector end of the cable into the "COM1" port of the WinCE data connector.

4. Insert the cable end of the Leica 563809 cable into the "Port 1l" port of the GPS, and insert the Lemo connector end of the cable into the "COM2" port of the data connector.

5. Open SurvCE on the data connector to configure its settings with the Leica GPS.

Tags: cable into, data connector, cable Leica, connector cable, connector cable into

Use A Neo+G Karaoke Machine

Use a Neo+G Karaoke Machine

NEO+G is a new format of karaoke disc that is capable of holding a large volume of songs. For those addicted to karaoke, you know how convenient it is to be able to carry one disc with all of your favorite songs rather than several hundred discs with a few songs on each. Here's convert your CD+G collection to the NEO+G Karaoke Machine compatible format.

Instructions

1. Rip your current CDG tracks to your computer hard drive. The ripping process produces two files, CDG and MP3.

2. Download and run Realmedia Converter. You can download the file for free from Download3K.com.

3. Click the "Edit" menu in Realmedia Converter and select "Insert Track."

4. Browse to your CDG file and select it. The file path displays in the "Properties" window. Click "OK."

5. Select the MP3 file. Fill in the Title and Singer fields-other fields such as lyrics and composer are optional-and click "OK."

6. Decide the type of disk you wish to create, DVD 5 or DVD 9, from the "Build" menu. Then select a folder to which to place the new NEO+G files.

7. Navigate to the new NEO+G files and burn them to DVD using your favorite DVD burning software such as Nero or Easy DVD creator. Now you can play the DVD in any RSQ karaoke player that supports the NEO+G format.

Tags: Karaoke Machine, Realmedia Converter, your favorite

Hook Up Hdv To Hd Cable Boxes

Connect an HDV camcorder to an HD cable box to record programs straight from the box.

HDV (high-definition video) is a format used by many digital camcorders for capturing and playing video. The format is trademarked by Sony and JVC Electronics, although other digital camera makers have adopted the technology. The camcorders use an HDV port to connect an audio-video cable to other digital devices, such as an HD cable TV box. The cable terminates on the other end with a six-sided High-Definition Media Interface (HDMI) plug, which is a standard connection for many HD devices. The cable typically comes with the camcorder, although replacements are available from the camcorder manufacturer and electronics stores.

Instructions

1. Unplug the cable box from the electrical outlet, turn off the camcorder and lift off the protective flap over the HDV port on the side or back edge of the device, using a thumbnail.

2. Insert the smaller plug on the HDV-to-HDMI cable into the camcorder port. The plug inserts in one direction only, so make a not of the notches in the plug and line them up with the outline of the port.

3. Connect the plug on the other end to the HDMI OUT port on the back of the HD cable box with the wider end of the plug turned upward. This connection makes it possible to record programming off the cable box onto the camcorder's hard drive. The camcorder can then be hooked up to a TV or a computer with a digital input for viewing the recorded programs.

Tags: other digital, video format

Text Message With Verizon

Text Message With Verizon

Text messaging is a quick and easy way to convey a message or comment about something to another person using a cell phone. With Verizon, anyone who signs up and gets an account with Verizon also receives the ability to send text messages to anyone with a cell phone account at any other provider. These directions tell you send a message from a cell phone but there are two other ways to do it without a phone: see Tips below.

Instructions

1. Open up the messaging section of your phone. Select the option for composing a new text message.

2. Enter the full 10-digit number of the cell phone you want to text. For instance, if the cell phone you wanted to send the text message to was (123) 456-7890, then you would enter 1234567890 using your phone's keypad.

3. Enter your message in the space below the number. Note that you are limited to 150 characters.

4. Press the button to submit the text message. The phone will usually indicate the button to be pressed.

Tags: cell phone, With Verizon, Message With, Message With Verizon, send text, Text Message With

Get Numbers From A Broken Phone If They Weren'T Saved On The Sim

Cell phones have become increasingly popular due to advancements in technology. Cell phone users often store contact information in their phones. When a cell phone is lost, stolen, broken or the numbers are accidentally deleted, users are left without important contact information. There are a few ways to retrieve this data without the use of a SIM card and ways to protect valuable information for the future.

Instructions

1. Log in to your wireless account through your cellular service website. Access the back-up assistant, if you subscribe. Back-up programs, such as the Verizon Wireless "Back-up Assistant," automatically save contact information that is on your cell phone. Back-up programs allow users to access contacts as well as, print, add, delete or edit contacts online. This can be done from anywhere, at anytime (Reference 1). There is a minimal charge which is well worth the ability to have access to your contacts regardless of your location or the condition of phone.

2. Sync a new phone with your computer, if you have previously performed a back-up on your old phone. Most smart phones and the iPhone come with an USB cable, which allows the cellular user to sync, or back-up, the data on the phone. Contacts, music, calendar entries, and more are available for retrieval at any time, by syncing the phone to the computer. If you have previously preformed a sync with your now broken phone, you can connect the new phone to your computer in order to download all of the saved information. However, if you have saved additional contacts since the last sync, those phone numbers will not be available. For example, if your last sync was three weeks ago, any number added since that time will not be on the computer for download to the new phone.

3. Visit a local retailer and ask them to transfer the contents onto a new phone. The contents can be transferred by connecting the phones to their computer system. In some instances, such as extensive water damage, the retailer may not be able to complete this process. The process only takes a few minutes and is usually free of charge. However, there may be a small fee applied if you purchased your new phone from a third-party such as eBay or a friend.

Tags: contact information, Back-up programs, computer have, computer have previously, have previously, last sync

Camera Optical Zoom Definition

Use optical zoom to make your subject appear close up.

If shopping for a digital camera feels like wading through electronic alphabet soup, don't let advertisements boasting a camera's MP rating, x-factors or inclusion of a CCD or a CMOS get you down. Many of these abbreviations refer to a single, sought-after camera feature: zoom. Compact digital cameras offer two types zoom: optical and digital. Although represented by a smaller x-factor number on the box, optical zoom creates close-up photographs using all the MP -- or megapixels -- available from the camera.

Optical Versus Digital Zoom

Not all zooms are equal. Optical zoom uses the lens, or the optics, of the camera to fill the digital sensor with data. This type of zoom utilizes all of the pixels available to record the image. Digital zoom modifies the image recorded on the sensor by trimming off the edges of the image, then stretching the photo proportionally.

Both digital and optical zoom crop an image, but the resulting photo quality differs. While digital zoom makes the image appear larger, it degrades the quality of the photo since fewer pixels compose the image. As a general rule, only use optical zoom on your digital camera for the highest quality image possible. You can later achieve digital zoom-type results by cropping the photo in photo editing software to make the subject appear closer to the camera.

Explaining X-factors

Digital camera manufacturers rate zoom with an x-factor. Think of the "x" as a multiplier. If the camera has 5x zoom, you can make a subject appear five times closer than you see with the naked eye. If the camera package contains wording such as "5x zoom" or "up to 30x zoom", find out if the numbers refer to optical or digital zoom. Some advertisers will only advertise the zoom type with a larger x-factor to make the camera more appealing.

When using optical zoom combined with an automatic exposure mode on a compact digital camera, the camera automatically adjusts the aperture ring in the camera lens. This adjustment affects the depth of field, or depth of focus visible in the image. As the lens zooms, the aperture ring closes down, allowing less light into the camera. The combination of a longer focal length -- caused by zooming -- and less light causes the depth of field to become shallow. Images captured using the fullest extent of the optical zoom feature often have a soft, blurred background, making the subject appear dominant in the photo.

Megapixels and Optical Zoom

Don't confuse a camera's megapixel rating and optical zoom rating. The amount of megapixels refers to the image size possible from that individual camera. A camera rated at 10MP will offer more detailed images than a 3MP camera.

An optical zoom function will utilize all of the megapixels available for its resolution setting to record your pictures whether you zoom a little or a lot. Optical zoom will not affect the resolution of a picture, unlike digital zoom.

Using Optical Zoom

Only compact digital cameras with built-in lenses offer an optical zoom feature. Single-lens reflex (SLR) interchangeable-lens cameras don't have optical zoom. Many compact digital cameras feature a toggle switch, buttons or a small lever to activate the optical zoom feature. Look for labels such as "T" and "W" on the camera to indicate telephoto and wide-angle views, the two endpoints of a given zoom range. Some cameras use pictorial representations for optical zoom such as a grouping of trees to represent a wide view and a single tree to indicate a close-up view.

Tags: optical zoom, optical zoom, subject appear, compact digital, digital camera, digital cameras

Clean A Sensor On A Canon Rebel Slr Camera

Clean a Sensor on a Canon Rebel SLR Camera

The Canon Rebel series of digital SLR cameras provides high quality images, but those images could be tainted if a piece of dust, dirt, or other small object interferes with the image sensor. The image sensor is deep within the camera and Canon has a fairly easy process allowing you to access it and clean the dust out. You only need a few supplies and know use the basic operations on the camera.

Instructions

1. Charge the camera's battery or use an A/C adapter. If the camera powers down during the cleaning, the image sensor will be left open and more damage could easily be done because the image sensor is highly sensitive. Charging the battery for 30 minutes to one hour is plenty of time.

2. Remove the lens from the camera and set it to the side. When looking in the body, you will notice a mirror. The image sensor sits right behind that mirror.

3. Turn the camera on. Press the menu key and load the "2" tools menu with a small icon of a wrench and hammer. Use the camera's arrow buttons to scroll down and select the "Sensor Cleaning" option. It is the sixth option in that menu.

4. Use the arrows to select "Ok" on the sensor cleaning confirmation screen. Press the "set" button to confirm the settings. Give the camera a second to process the request and soon the mirror will pop-up in the front of the lens.

5. Make sure the "Sensor Cleaning" is working properly by looking for the word "Clean" on the LCD screen. You can also see the word written on the small LCD numbers in the viewfinder.

6. Use an air blower to clean dust off the sensor. The official Canon Rebel manual recommends a rubber blower, but you can get a cheaper blower by purchasing a glass turkey baster. It performs the same task as the blower and sometimes works better because a small tip can blow more forceful air.

7. Turn the camera off after all the dust is blown off. Wait a second for the shutter to close. Reattach the lens and test the camera out to make sure that the dust is removed from the photos. The easiest way to test this is by shooting against a solid color like a wall and looking for any extra things on the photo.

Tags: image sensor, Canon Rebel, Canon Rebel Camera, clean dust, Clean Sensor, Clean Sensor Canon

Sony Digital Cameras

Without question, Sony has long been one of the world leaders in electronics, having produced TVs, computers, and video game systems for decades. It's no surprise, then, that Sony has digital cameras models in the all major market categories. As of April, 2011, Sony has a wide range of point-and-shoot, DSLR and interchangeable-lens cameras.

Point and Shoot

Sony's line of digital point-and-shoot cameras is called Cyber-shot. These cameras are designed for beginners and have varying specifications and prices. The higher-end Cyber-shot cameras, like the TX9 and TX5, feature 12+ megapixel sensors and HD video modes. The TX9 even includes a 3D panoramic sweep capture mode. Features decrease as the price decreases, but even the most limited Cyber-shot cameras have high megapixels (10 to 14.1) and Sony's Face Detection and SteadyShot technologies.

DSLRs

Sony calls it DSLR cameras "alpha," indicated by the Greek character. The alpha cameras cover three distinct market groups: prosumer, or beginner DSLRs, translucent mirror and professional SLR. The prosumer cameras are designed to be easy to use and to bridge photographers from point-and-shoot photography into advanced photographer. The a390, for example, has on-screen help and quick, easy focus technology. It comes with an 18-55mm kit lens and 14.2 megapixel sensor. On the opposite end of Sony's DSLR scale is the a9000, with 24.6 megapixels, shutter speeds up to 1/8000 of a second and a range of settings to make most photographers drool. Choosing a DSLR camera is about imagining your top-end as a photographer; know you limits and try to understand the features of a camera, then buy within your photographic means.

Compact Interchangeable Lens

Sony has a line of cameras that fall in between the point-and-shoot and DSLR markets, called interchangeable lens cameras. The name doesn't really distinguish these cameras from DSLRs, which are by nature interchangeable lens cameras, so look for the "NEX" tag on Sony's models. The NEX cameras different from a DSLR in one key way: the camera body is compact, as small as a compact point-and-shoot, but the NEX cameras have a special lens mount to take E-mount Sony lenses. These lenses aren't the same as the ones for Sony's DSLRs, but offer photographers a range of options that point-and-shoot lenses don't have.

Konica Minolta

Until January 1, 2011, Sony sold and offered support for Konica Minolta cameras. Sony took over the Minolta line in April, 2006. Still, Konica-Minolta models can be found used online, and the lenses from the SLR models are compatible with Sony's DSLR alpha-series cameras (if not supported by Sony's tech support).

Tags: 2011 Sony, cameras designed, cameras have, Cyber-shot cameras, DSLR camera

Build A Tivo

TiVo is one of several brands of digital video recorders (DVRs). The technology of DVR allows you to record TV shows as they air, and play them back later. A DVR has all the features of VCRs, but it can also pause live TV, set up recurring recordings and more. Use these instructions to make your own DVR.

Instructions

1. Choose a TV capture card, which allows you to receive TV signals on your computer. If you have an older or less powerful PC, consider looking for a card that does the video encoding on the card in order to free up PC processing power.

2. Pick digital video recorder (DVR) software. Most DVR software requires that your computer be running either Windows or Linux. Since recent Macintosh computers typically run on a UNIX-based backend, you may also be able to run DVR software off a Mac.

3. Install the TV capture card and the DVR software on your computer. Connect the TV capture card to your cable service. Follow the instructions provided by the TV capture card to tune in TV signals.

4. Configure the DVR software. You may need to configure a location for the software to download your local TV listings. Once you have TV listings, you may set the DVR to record your favorite TV programs and play them back on demand later.

Tags: capture card, your computer, digital video, play them, play them back

Fix Vhs Tapes

Fix crinkled tape in your VHS cassette.

Although DVDs and Blu-Rays are more commonly seen in households these days, many people still watch movies or home videos on VHS cassette tapes. Home videos of your children’s school play or your granddaughter’s first birthday are irreplaceable. Sometimes, after hitting the "Eject" button on your VCR, the tape inside the cassette gets caught and unravels from the tape spool. This causes damage to your cassette, especially when the tape is creased or wrinkled. Before throwing your VHS cassette tape away, attempt to fix it with a couple of techniques.

Instructions

Rewind or Fast Forward

1. Flip back the cover at the top of the VHS cassette and hold it in place with your hand or a piece of masking tape.

2. Stick your finger into one of the spools, which usually looks like a white circle with a small, toothed hole in the middle.

3. Twist the spool so that the tape begins to pull back into the cassette. Do this until the tape begins to tighten around the spool.

4. Smooth out the wrinkles when rolling the tape back into the spool. Ensure the creased part of the tape lies flat against the spool.

5. Insert the tape back into the VCR and hit the "Rewind" or "Fast Forward" button. This will roll the tape backward or forward, putting several layers of tape over the wrinkled part.

6. Hit "Eject" to remove the cassette from the VCR and leave the cassette out for several days. Reinsert the cassette into the VCR and rewind or fast forward to the damaged area to make sure it is still playable.

Ironing

7. Flip back the cover at the top of the cassette and hold it in place with a piece of masking tape.

8. Stick a pen into the hole at the bottom of the cassette tape to release the latch on the tape reel.

9. Carefully pull out the damaged section of tape from the tape spool. Place the section on an ironing board with the backside facing up.

10. Set your iron to its coolest setting with the steam function turned off. In a back and forth motion, sweep the iron over the wrinkled area of tape to flatten it. If the iron is too cool, gradually increase the heat until you begin to see the tape flatten.

Tags: back into, your cassette, back cover, back cover cassette, cassette hold

Switch Your Nextel Number To Boost

Utilize local number porting to switch your number from Nextel to Boost.

Switching your Nextel number to a Boost Mobile account is called local number porting. Porting your number is a process governed by the Federal Communications Commission (FCC). It allows you to switch your number to another carrier within the same geographic area. Porting your number to Boost requires that you submit a number portability request, which Boost Mobile can complete.

Instructions

1. Contact the Boost Mobile customer service department at 866-402-7366 and follow the prompts to speak with a representative.

2. Inform the representative of your intent to port your Nextel number to their company.

3. Provide the representative with your name, billing address and Nextel account number when told to do so.

4. Wait for the representative to process your number portability request. Contact the Boost customer service department in three to seven days to verify that they have activated your number.

Tags: your number, Boost Mobile, Contact Boost, customer service, customer service department

Graphic Calculator Tricks

Discover the tricks you can do with a graphic calculator.

A graphic calculator is another name for a graphing calculator. With graphing calculators, you can create graphs, solve equations and perform basic calculations. A graphing calculator is necessary for algebra, trigonometry and calculus classes. Some graphing calculators are customizable, allowing users to create their own programs. There are tricks you can try with the newer versions of graphic calculators. They include creating pie charts, downloading games and drawing graphs.

Graphs

Older versions of graphic calculators allowed you to create linear graphs. With newer versions, you can create a variety of graphs. These include pie charts, bar graphs, stacked bar graphs and inequality graphs. The basic linear graph will remain an option on the graphic calculator. Some newer graphic calculators will have an option to create these graphs in 3D. This will help assist you with tests, homework and projects.

Spreadsheets

Enter data or text in the appropriate cells to create a spreadsheet in newer versions of graphic calculators. It's also possible to create or solve formulas on spreadsheets. Plus, there is an option to save spreadsheets for future reference or to add more data. With the USB cable that comes with most graphic calculators, you can upload spreadsheets onto a computer. There will be computer-specific requirements for using the USB cable.

Pen Touch Operation

Some graphic calculators come with their own electronic pen that recognizes the calculator once it's in contact. This allows you to make selections in the menu, operate buttons or "drag and drop" items. With the pen touch operation, you can also draw linear graphs or geometric figures.

e-Activities

Graphic calculators allow you to create e-activities--mini mathematical lessons for use in and out of the classroom. With e-activities, you can combine text, data and graphics. Some e-activities will allow you to "flip" to show the explanations and examples, like a virtual flashcard. These are ideal for studying for a test or doing homework.

Tags: graphic calculators, graphic calculator, newer versions, versions graphic, versions graphic calculators, graphic calculators, graphing calculator

Choose A Tripod Head For Outdoor Photography

The right tripod head will make using a tripod easier for outdoor photography.

Tripods are used by many different photographers in all genres of photography. The design, height, weight and ease of use are all important considerations when selecting a tripod. At the top of the tripod is the "head," where the camera is attached. On more advanced models, you buy the tripod and head separately. This gives the photographer the ability to select the type of head that will work best with the equipment that is being used.

Instructions

1. Obtain the weight of the largest lens and camera that you will be using when photographing outside. You should also consider any other large telephoto lenses that you may be buying or renting in the future.

2. Compare the specifications of the tripod heads that are available. Choose from heads that will support the weight of the lens and camera.

3. Inspect the mechanics of the tripod head. Traditional heads have a three-way adjustment for panning, vertical axis and horizontal axis. These adjustments are normally tightened using adjustable handles. Other models have a grip that looks like a joystick that can be moved into a variety of different positions easily and quickly. A third design features a "ball head" with a locking latch which also allows you to adjust the lens and camera into a variety of different positions, then lock into place.

4. Determine which of these designs works best for your needs. If you are shooting fast-moving objects such as wildlife then the grip design may be the best for your needs. If you are shooting landscapes with long exposures, the traditional design with handles that can be tightened may be better.

5. Compare the prices of the different head designs. Select the head that matches your needs and fits into your budget.

Tags: tripod head, lens camera, that will, your needs, your needs shooting, best your, best your needs

Use Hp Premium Inkjet Transparency Film

Use HP Premium Inkjet Transparency Film

Presenting information using an overhead conveys a hands-on and interactive approach to teaching large and small groups. Some teachers consider transparencies an efficient alternative to electronic presentations because transparencies can be packaged in a folder and reused, without requiring a computer set-up. Inkjet printers such as Scanjet and Officejet produce attractive color transparencies with a specific setting for transparency media. The HP Premium Inkjet Transparency Film contains a specific coating on a clear plastic sheet for ink to adhere to and quickly dry.

Instructions

1. Make sure the drivers and utilities for the inkjet printer are installed on the computer.

2. Open the desired document (which launches the source application).

3. Select the "Print" function (usually located under "File" in the top menu bar).

4. Select the target printer and select the following printing options (usually found under "Page Setup" or "Options" in the Print menu):

Paper size: 8-1/2" x 11"

Paper type: HP Premium Inkjet Transparency Film or Inkjet transparency film

Print quality: Normal or better (use "Best" for photos)

5. Load the sheets of transparency film in the paper tray so that the sticky or rough side is facing the side for printing and the white tab is facing the paper feed (so that the printer can grab this edge).

6. Click the "Print" button and wait for the printer to generate the printouts. The transparency film setting affects how quickly the paper is ejected from the printer to allow for sufficient drying time.

Tags: Premium Inkjet, Premium Inkjet Transparency, Inkjet Transparency, Inkjet Transparency Film, Transparency Film, transparency film

Convert 8mm Film To Video

8mm movies can be transferred to video using an 8mm telecine.

Properly transferring film to videotape requires an understanding of frame rates. Film displays at 24 frames per second, while video records at 30 frames per second. This disparity between frame rates results in image flicker when you attempt to use a video camera to record the projected film image. Because early television required using film as a primary resource, engineers created a device known as a "telecine" that used a specially designed shutter in the film projector to eliminate the flicker associated with different frame rates. 8mm telecine projectors are available for the home movie hobbyist.

Instructions

1. Place the 8mm telecine projector on a flat surface level with a tripod mounted video camera.

2. Mount a camcorder on a photo tripod and point the camera towards the telecine condenser lens.

3. Thread the projector with the 8mm film you wish to convert to video.

4. Place the projector in the "Forward Run" mode to begin projecting the film image into the condenser lens.

5. Focus the projected image on the condenser lens by adjusting the focus ring on the film projector.

6. Turn on the camcorder, insert a video tape and focus the camcorder on the image that appears in the telecine condenser lens. Be sure the entire image fills the camera viewfinder.

7. Rewind the film to the beginning.

8. Press the record button on the camcorder and return the film projector to the "Forward Run" position.

9. When the film has finished, stop the recording on the camcorder. Repeat as needed until your 8mm films are transferred.

Tags: condenser lens, film projector, frame rates, film image, frames second, projector Forward, telecine condenser

Use Kenyon Gyros On Video Cameras

The Kenyon Gyro camera stabilizer helps a camera capture clear shots in unusual situations, such as from a helicopter or plane. The device is compatible with any video camera that has a tripod recess. Operating a camera with the Kenyon Gyro attached takes some getting used to, but with practice and a few helpful hints, it's fairly easy to master. Soon enough you'll capture stunning images in circumstances where movement or vibration might normally ruin a shot.

Instructions

1. Line up the Kenyon Gyro lengthwise with the lens of the camera. Attach the Gyro to the camera by screwing the thumb screw on top of the device into the camera's tripod recess until snug.

2. Plug the three-pin XLR cable into the top end of the Gyro battery; only one port will fit the plug. Plug the battery pig-tail into the four-pin plug on the inverter on the back of the Gyro.

3. Press the switch on the inverter and a green LED will turn on and the Gyro will start to warm up. Allow the Gyro to warm up for 12 to 15 minutes until the internal wheels reach their maximum RMP, which is indicated by the leveling off of the high-pitch sound.

4. Hold the camera with the Gyro attached in front of you without jerking or making rapid movements. Allow your arms to relax and move with the motions of the Gyro.

5. Look through the viewfinder and begin recording. Follow the shot by moving the camera in slow, steady movements.

Tags: Kenyon Gyro, camera with, Gyro attached, Gyro camera, tripod recess

Make A Homemade Stained Glass Light Box

A stained glass light box helps you choose the best combination of glass colors and textures for your project.

A stained glass light box is an important tool for viewing and choosing the best colors for any stained glass project. The light box enables you to see how the colors you choose look next to each other in transmitted light. The light box makes it much easier to determine the best combinations of color, texture, translucence and pattern direction. As you cut and shape the pieces, you can also lay them out on the light box to make sure the final layout looks as planned.

Instructions

1. Measure and mark 1/4 inch from one long edge of each 1-by-6-inch piece of wood.

2. Screw the four pieces of molding along the mark 1/4 inch from the edge, onto the appropriately sized 1-by-6-inch boards (the 40-inch molding to the 40-inch 1-by-6, the 20-inch molding to the middle of the 28 3/4-inch 1-by-6). This provides a shelf for the glass or plexiglass.

3. Screw the 1-by-6 boards together at the corners, using the builder's square to make sure the corners are at 90 degrees. Place the short sides inside the long sides when forming the box.

4. Attach the 2-by-4s to each corner of the short side with screws. Leave 1/4 inch at the top to match the edge of the molding.

5. Measure and cut 2-by-4-inch rectangles out of each corner of the 30-by-40-inch plywood to fit around the legs.

6. Fit the plywood to the bottom of the box formed by the 1-by-6 boards and screw it into place.

7. Paint the interior of the box white and let it dry.

8. Attach the light fixtures to the interior of the box, along the bottom. Drill a hole and run the cords out to an on/off switch or power strip affixed to the outside of the box.

9. Set the glass into place on the shelf formed by the molding.

Tags: 1-by-6 boards, each corner, glass light, inch from, into place

Pose For Family Portraits

Out of the many, which of your new beautiful pictures would you place in this frame?

It's true that looking great in photos takes a little bit of work, but it's worth it when you see the results. If you think your pictures don't make you look half as good as you do in person, relax! There are ways to pose so that you leave behind a legacy of family photographs where your most photogenic self shines!

Instructions

1. Stand with your hands on your hips to give the illusion that you are shapelier. You now appear to have more of a whittled waist. This stance also works quite well for flabby arms. Keeping flab away from the body de-emphasizes it and makes your arms seem more slender, although you may want to rethink your clothing options for a family portrait. If your arms do not need to be exposed, wear a long-sleeved top instead.

2. Tilt your chin slightly upwards, just enough to keep it from squashing against your neck, which shows off an unsightly double chin. Doing this and relaxing your shoulders as you sit or stand straight helps your neck look longer as well if you feel that your proportions are nowhere near a swan's.

3. Position yourself always at the level of the camera, if not slightly underneath. If it were the other way around, with the lens below you, your nostrils are guaranteed extra, unnecessary and unflattering attention.

4. Turn towards the side for another technique to not looking so hefty. We've all heard it before: The camera purportedly adds pounds!

5. Smile! You don't want to leave behind pictures of you wearing an ominous expression. Models sometimes cast their eyes downwards, then look up just shortly before the photographer clicks the shutter. This gives your eyes a brighter appearance since your eye muscles are not exhausted staring in the same direction for long.

6. Sit straight to hide any bulges in your midsection. If this barely achieves anything, see if it is acceptable to lean back instead, as though you were lounging. In this position, simply suck your stomach in to make it appear as flat as possible. Make sure you aren't pulling your shoulders up! This is a dead giveaway that this pose is not as natural as you want to make it seem.

7. Look for ways to position your legs comfortably if they are part of the portrait. Their placement should appear graceful and effortless, not awkward, and nothing we don't have to see should be revealed if you are sitting and wearing a short skirt.

Tags: leave behind, your arms, your neck, your shoulders

Effects Of Radio Frequency Identification On The Global Economy

The RFID chip is making strides to replace barcode identification.

Radio Frequency Identification (RFID) chips are tags that contain an antenna allowing the chip to broadcast and receive radio transmissions to and from readers. The chips have endless uses, including the tracking of anything from products, documents, animals and even humans. Since the RFID chips can process and store information, they can easily be updated to keep data current. Congress has, on several occasions, attempted to pass laws requiring RFID chips be mandatory in American identification cards, though they have yet to find enough votes.

Replacing Barcodes

RFID chips have a read-write option, making it easy to keep information current. RFID chips can be reprogrammed, while barcodes have to be replaced. Additionally, while barcodes are bound to around 50 bytes of information, there is nearly no limit to the data capacity of an RFID chip. Though RFID chips are more expensive than barcodes, they become cost-effective when purchased in bulk, as they are a good form of theft protection.

Cost Reduction

RFID chips have been implemented by the airline industry, tracking luggage and flight equipment, an expense that has cost the airlines an estimated $12 billion per year in the past. RFID chips are being implemented in retail stores more and more as well to reduce the loss and misplacement of goods. Because the tag can be read through radio waves up to a few meters away, it is also far easier to keep track of products that use them. It also means a store can potentially know exactly how many products are on the floor at any given time without having to individually count or scan each product or barcode. There is also potential to use RFID technology in ticket sales for concerts and sporting events to prevent against counterfeit ticket sales.

Human Tracking

The use of RFID chips in humans has mainly been in foreign countries where kidnapping may run rampant, specifically against children. In Mexico, a company called Xega offers systems centered on an RFID implant injected into the client's arm. The RFID chip transmits a signal to an external GPS device the client must carry. If the client is kidnapped, there is a panic button on the device that alerts Xega. A satellite can then locate the victim. The company has seen steady sales increases with over 2,000 customers, and they expect to expand operations to Brazil, Colombia and Venezuela.

Revenue

The RFID market exceeded $5.6 billion in sales in 2009 in spite of the recession, an increase of over $240 million from the previous year. The market for pallet, case and item-level tracking is expected to grow by 20.5 percent per year globally, between 2009 and 2014, from $169.9 million to $431.6 million, with recent expansions in its program to include more Chinese and Indian suppliers. Analysts expect the market to reach more than $9.2 billion in 2014.

Tags: RFID chips, chips have, RFID chip, Frequency Identification, Radio Frequency, Radio Frequency Identification, RFID chips have

Take Out The Memory Card In An Evo 4g

The HTC EVO 4G comes with an 8-GB micro SD memory card pre-installed in the phone. If you need a memory card with more room, you can remove the EVO 4G's pre-installed card and replace it with a higher-capacity memory card. The EVO 4G supports micro SD cards up to 32 GB. The phone also has 1 GB of internal memory, so you can get by without a memory card if necessary.

Instructions

1. Turn off the phone.

2. Remove the battery door by inserting your fingernail into the notch on the top-left corner and lifting. Set the battery door aside.

3. Remove the battery by grabbing the finger holds on the top left and right corners. The battery will swing outward. Set the battery aside.

4. Lift the latch on the micro SD card slot. The latch is located on the bottom-right corner of the battery compartment.

5. Slide the micro SD card out of the slot. Insert a new micro SD card if desired.

6. Press down on the micro SD card slot latch to lock it. Replace the battery and battery door.

Tags: micro card, battery door, card slot, memory card, micro card slot, card slot latch, Remove battery

Determine If A Cell Phone Is Bugged

If you have been hearing strange noises and weird tapping on your cell phone lately, don't panic. You are probably just a bit paranoid. However a phone bug can be a scary thing and there are ways to determine if you've truly been tapped. Take a look at these tips for pinpointing a pesky eavesdropper.

Instructions

1. Monitor your battery. If you are losing unusual amounts of juice or have a dead battery after a five minute call this may be an indication that your phone has been bugged.

2. Feel the temperature of your cell when it is not in use. A heated phone is normal during use but in periods of down time your phone should be at room temperature. If it is hot after sitting for hours there is cause for concern.

3. Listen for a constant buzzing. Most cell phones have a low hum while in use but make jumpy, inconsistent noises when hung up. If your phone is making a constant, streamlined buzz sound when you are not on calls you might have a problem.

4. Check your cell for weird volume changes and scratchy noises. Think of it like the Rice Krispies cereal. If your cell has consistent "snap, crackle and pop," you may be carrying a bug.

5. Test your cell by removing the battery for 24 hours. By removing the battery, you are cutting off all communication to your phone (hopefully). Replace the battery and watch the phone. There could be a bug if it resumes the strange noises, low battery and heat.

6. Contact the police. Think carefully before contacting law enforcement. If you decide to go through with this step, most police stations have equipment that can test your phone for a bug.

Tags: your cell, your phone, removing battery, strange noises

Troubleshooting The Sony Hi8 Handycam Trv138

Power Issues

The Sony Hi8 TRV138 can be operated by battery and with the use of an AC adapter. If the camera does not power on, one of two things could be in play. The battery pack could be dead or detached from the camera. If the camera works when the AC adapter is plugged in, then the battery needs to be recharged. If not, then the battery needs to be reseated. To do this, remove the battery then reattach it by firmly lining it up with the leads and snapping it to the lock.

It is also possible that the internal computer is operating in a panic mode. Resolve this by disconnecting all power sources for one minute and reattaching them. This will draw down the internal battery and cause a "soft reset." If that fails, a hard reset is necessary. Using an unfolded paper clip or other narrow, pointed object, press the RESET button. The button will be recessed behind a small hole near the AC adapter input. This will reset all functions and settings of the camera.

Sony recommends that the TRV138 and all of its cameras be operated on a fully charged battery.

Viewfinder/LCD issues

The viewfinder of the TRV138 can only be operated when the LCD window is closed. If the window is open, the viewfinder cannot be used. If the window is closed and the viewfinder is blurry, adjust the focus with the dial underneath the viewfinder.

If the LCD screen is displaying an unknown picture, the camera is in DEMO mode. The TRV138 will slip into DEMO mode when it has been set to CAMERA for more than 10 minutes without loading a cassette. Once a tape is loaded, the DEMO mode will go away.

Recording issues

If the camera does not start recording when pressing the record, it is likely that the tape has reached the end. Either rewind or replace the tape. If during recording the auto focus is not working, it has likely been turned off and needs to be reactivated. Color issues are usually attributed to the use of NightShot plus setting or operation in an area with high levels of fluorescent, sodium or mercury light. The first can be changed by pressing the auto focus button. The latter can only be remedied by adjusting the light source or recording location.

Tags: DEMO mode, auto focus, battery needs, camera does, then battery

Set The Poweroff Timer On Your Iriver Clix Mp3 Player

The iRiver Clix is a portable media player that can be customized for your needs. The main menu displays the various functions, including Extras, FM Radio, Now Playing, Music, Pictures, Videos and Settings. By clicking on the bottom of the screen, you can scroll through these menu options. The Settings menu lists these customizable features: Date & Time, Sounds, Display, Smart Key, Timer and Advanced. To set the timer on your iRiver Clix MP3 player to automatically turn the device off, follow the steps below.

Instructions

1. Look at the Getting Started section in iRiver Clix manual to familiarize yourself with the controls. Press the "Power" button to turn your player on.

2. Look at the display and ensure that you are at the main menu. Click on the bottom of the screen to scroll down to the "Settings" option. Click on the right side of the screen to select "Settings."

3. Click on the bottom of the screen to scroll down to the "Timer" option. Click on the right side of the screen to select "Timer."

4. Select the "Auto Power-Off" option. This is where you can select the idle time value, or the time when the player is on but not in use. Leaving the player on when you're not using it drains battery life. Enter the idle time value to suit your needs.

5. Click on the left of the screen to return to the main menu. Now you can resume playing music, watching videos or playing games.

Tags: bottom screen, bottom screen scroll, iRiver Clix, main menu, screen scroll

Operate Southwestern Bell 936 Remote Message Retrieval

The Southwestern Bell 936 answering machine records voice message from callers when you are unable to answer your home telephone. One of the features of the answering machine is remote message retrieval. This allows you to check the messages on your answering machine from any touch-tone phone. This is helpful if you are out of town or away from your home for prolonged periods of time.

Instructions

1. Dial your phone from a touch-tone telephone.

2. Listen to your outgoing greeting. When the greeting is over, a beep will sound. Within 20 seconds of this beep, enter your three-digit personal code. The code is located on a sticker on the bottom of your unit. It can not be changed or reset. Press and hold the first digit for one to two seconds, then release. Wait two seconds before pressing the second digit downward for one to two seconds. Release the button, wait two seconds and press the third digit.

3. Listen for a beep after entering your code. If one short beep is heard, the code was correctly entered. If no beep is heard, attempt to reenter your code.

4. Press "1" to play messages in mailbox one, press "2" to play messages in mailbox two, press "3" to record a memo message, press "8" to record a new outgoing greeting or press "9" to turn the answering machine off.

Tags: answering machine, beep heard, from touch-tone, mailbox press, messages mailbox

Compare The Fluorescent To The Tungsten

At first, the comparison between fluorescent and tungsten may seem simple, but such a decision can impact the work environment, home environment, product quality, even financial situation. When comparing fluorescent and tungsten lighting, important factors to consider include location, spacing, safety and cost.

Instructions

1. Consider the location and purpose of the light in question. Is it a smaller room or a large, open area? Will people be reading and studying under the light or moving actively? If a work-based environment, is the location a photo studio or a place that works with details and colors? Does the light require a dimmer?

2. Consider the output and safety of the light. Fluorescent light bulbs emit 90 to 95 percent of their energy as light, while tungsten light bulbs emit 90 to 95 percent of their energy as heat. Will the lights be used in wide, open spaces? Will the lights be near flammable materials or papers? Are the lights recessed and potentially prone to overheating?

3. Consider cost and energy efficiency. Fluorescent lights will always be more energy efficient than tungsten, however, there may be a cost involved to make a fixture fluorescent-friendly. Additionally, take note of how long the light and location will be in use; the long-term operating cost of fluorescent lights is less than that of tungsten, but in the short term tungsten may be less expensive.

Tags: bulbs emit, bulbs emit percent, emit percent, emit percent their, fluorescent tungsten, light bulbs, light bulbs emit

Discharge Rechargeable Batteries

Discharge Rechargeable Batteries

From time to time, it is very important to discharge a rechargeable battery. This helps prolong the life of the battery and helps the battery to have longer-lasting charges with each recharge. By not discharging your battery from time to time, you can end up destroying your battery.

Instructions

1. Let the battery run completely down in a device that is running at its maximum setting. This is the most effective and truly the only practical way to allow a battery to drain. For example, if your batteries are in a music player, then you would want to put the music on full-blast. Essentially, to drain your batteries most efficiently, use the maximum power on whatever device the batteries are in.

2. Use your rechargeable batteries often. Many rechargeable batteries will self-discharge when not in use after a period of time, however, deposits will build up in the battery if they are not used often. These deposits become areas that can no longer be filled with additional power, thus making it impossible for you to get the full charge out of a battery.

3. Avoid reverse charging. This will only damage your battery and is an ineffective way to discharge your battery. Reverse charging occurs when a battery is recharged with its polarity reversed. This most commonly occurs by putting a battery in the charger backwards or when you hook up an automotive battery to the reverse battery terminals. Reverse charging only shortens your batteries life span.

Tags: your battery, your batteries, Discharge Rechargeable, Discharge Rechargeable Batteries, Rechargeable Batteries, rechargeable batteries

What You Need To Know When Purchasing An External Flash For A Nikon D40

Four external flashes produced by Nikon are compatible with the D40.

Four external flashes made by Nikon are compatible with the Nikon D40: the SB-400, SB-600, SB-800, and SB-900. The SB-800 is no longer manufactured and was replaced with the SB-900.

SB-400

The SB-400 is the most compact option, weighing about 180 grams and typically sold for about $130. It runs on two AA batteries and has excellent battery life. The SB-400 allows the user to "bounce" the flash by flipping the bulb, so that the flash points upward and saturates the entire room with light, rather than just the subject. Illuminating only the subject with a flash results in dark backgrounds and washed-out faces.

SB-600

The SB-600 is much bigger than the SB-400, weighing in at 390 grams, and sells for about $220. It runs on four AA batteries. The SB-600 can be twisted and tilted in any direction (the SB-400 only flips up vertically) and can be triggered by a remote. The SB-600 also has a wider range of exposure compensation settings than the D40's built-in flash does. The SB-600 is a higher-powered flash than the SB-400, but unless you are planning on shooting with flash constantly for an entire day, this won't make much of a difference to your battery life.

SB-800

The SB-800 weighs more than both the SB-400 or SB-600, about 440 grams. This flash was replaced with the SB-900 in 2008 and is no longer manufactured by Nikon. As of October 2010, this flash was available from online auction sites for around $300. The flash includes colored filters to match the light where you are shooting. It also allows the photographer to trigger other external flashes not attached to the camera.

SB-900

The SB-900 is Nikon's most advanced flash, weighing about 530 grams and costing almost $500. Professional photographer and blogger Ken Rockwell writes that the SB-900 "is more of a video game than a flash" and really only suited for professional news or wedding photographers. The SB-900 has a large zoom range and allows for a bit more pivoting than the SB-600 and SB-800. It also offers the remote flash option like the SB-800. For general photographers, the controls on this flash might be overwhelming and hard to use.

Tags: about grams, external flashes, about runs, battery life, compatible with, Four external